Car Lift Accessories Explained: Jacks, Casters & Adapters

Lift accessories solve different problems. A caster kit helps with permitted relocation; a bridge jack provides wheels-free lifting; an adapter changes the contact arrangement. The right choice depends on the exact lift and vehicle.

Bridge jacks and jack trays are different

A bridge jack is a lifting device that fits a compatible runway lift and raises an approved part of the vehicle off the runways. Check its own capacity, support arrangement, lift range and locking procedure.

A jack tray provides a place for compatible lifting equipment when the lift and tray manufacturers permit that use. A tray is not automatically a complete lifting system. Its rating does not establish the capacity or suitability of a separate jack.

Confirm rail spacing, support geometry and approved combinations. Similar-looking four-post lifts can require different jack arrangements.

Caster kits are for the approved relocation procedure

Casters do not make every lift movable in every condition. Use only the specified kit and the model’s relocation procedure. Do not move a lift with a vehicle aboard unless the manufacturer explicitly permits that use for that exact configuration.

Check floor condition, thresholds, doorway clearance and the required position of the lift during relocation. A portability accessory is not a substitute for the installation requirements stated in the lift manual.

Truck adapters and frame cradles

Adapters help a compatible frame-contact lift reach approved vehicle lifting points. Frame cradles provide a different contact shape for applications specified by the manufacturer. Neither accessory increases the lift’s rated capacity.

Check the adapter connection, permitted combinations, contact stability and vehicle clearance. Do not improvise extensions or stack components beyond the approved configuration.

Drip trays, tool trays and platform panels

Drip trays help manage fluids between parked vehicles. Tool trays hold tools within their stated rating. Platform panels cover designated spaces only for the uses their manufacturer permits.

These items are not interchangeable, and a panel or tray should not be treated as a standing platform or vehicle support unless explicitly rated and approved for that purpose.

Before ordering an accessory

  1. Record the full lift model and, for an existing lift, its serial number or identifying plate.
  2. Describe the job you want the accessory to do.
  3. Provide the vehicle configuration and relevant lifting-point details.
  4. Confirm the accessory part number, capacity and written compatibility.
  5. Check whether additional adapters, air supply or installation work are required.

Send a photo of the lift’s identification plate if the model is uncertain. Olympic can help identify the appropriate accessory before you order.

Put the right equipment to work.

Tell Olympic about your vehicles, your space and the work you want to do.