Skip to product information
Olympic 2PCFHD-18 18,000 lb Heavy-Duty 2-Post Clear Floor Vehicle Lift – Pre-Order
1/10

Olympic 2PCFHD-18 18,000 lb Heavy-Duty 2-Post Clear Floor Vehicle Lift – Pre-Order

$10,635.58 USD $14,180.77 USD
Call 866-774-4531

Product details & specifications

OLYMPIC EQUIPMENT • HEAVY-DUTY TWO-POST LIFT

2PCFHD-18
Heavy-Duty 2-Post Clear Floor Lift

Designed for truck repair shops and fleet maintenance bays, the Olympic 2PCFHD-18 heavy-duty two-post clear floor lift combines direct-drive hydraulic lifting with reinforced construction, extra-long carriages and four rugged, two-stage arms. Its overhead design keeps the floor between the columns clear for access around the vehicle and your shop equipment.

HEAVY-DUTY CAPACITY 3 HEIGHT SETTINGS SINGLE-POINT LOCK RELEASE

Built for Your Heavy-Duty Service Bay

A strong choice for shops servicing heavy-duty pickups, work trucks, commercial vans and compatible fleet vehicles. The two-post layout provides underbody access and allows the wheels to hang free for brake, tire and suspension work when the vehicle is supported at its approved lifting points.

BEST SUITED FOR
  • Truck and fleet maintenance: inspections, lubrication and underbody repairs.
  • Wheel-off service: brake, tire, steering and suspension work.
  • Commercial service bays: three overall height configurations to suit the installation.
  • Mixed vehicle workloads: rubber pads, saddle adapters and height extensions provide multiple lifting-point options.

Heavy-Duty Features

  • Reinforced construction: heavy-duty columns and extra-long carriages provide support for demanding lifting applications.
  • Clear-floor design: overhead configuration eliminates a floor-level cross member between the columns.
  • Dual direct-drive hydraulic cylinders: deliver lifting force directly through the cylinder system.
  • Single-point manual lock release: releases both column locks from one side of the lift.
  • Four rugged, two-stage arms: adjust to reach approved vehicle lifting points.
  • Automatic arm restraints: help secure the arms in position during lifting.
  • Overhead safety shut-off: stops upward travel when the vehicle contacts the overhead shut-off device.
  • Three adjustable overall heights: configure the lift at 174, 186 or 198 inches.
  • Wide column spacing: 123½ inches between columns with 110 7/16 inches of drive-through clearance.
  • Cable synchronization: supports synchronized carriage movement across the three height configurations.
  • Self-lubricating components: UHMW polyethylene sliders and bronze bushings.
  • Practical shop details: tool trays and toe guards come standard.
Olympic 2PCFHD-18 two-post lift front and overhead dimension diagram

Specifications

Specification Olympic 2PCFHD-18
Lift Type Clear-floor, direct-drive two-post
Rated Lifting Capacity Approximately 17,637 lb
Lifting Time 84 seconds
Maximum Lifting Height — Without Extension Adapter 74 7/8–76¼ in.
Maximum Lifting Height — With Extension Adapter 83 7/8–85¼ in.
Maximum Lock Height — Without Extension Adapter 72 7/8–74¼ in.
Maximum Lock Height — With Extension Adapter 81 7/8–83¼ in.
Overall Height — Low Setting 174 in.
Overall Height — Medium Setting 186 in.
Overall Height — High Setting 198 in.
Overall Width 151 15/16 in.
Drive-Through Clearance 110 7/16 in.
Width Between Columns 123½ in.
Minimum Pad Height 6 7/8 in.
Gross Weight 2,906 lb
Motor 3.0 HP


Included With Your Lift

  • Four heavy-duty, two-stage lifting arms with automatic restraints
  • Single-screw rubber lifting pads with 1.97-inch-diameter pins
  • Saddle adapters
  • 3-inch and 6-inch extension adapters
  • Tool trays and toe guards

Optional Accessory: Extra-wide, heavy-duty saddle adapter kit. Contact Olympic Equipment for compatibility and availability.

Get Your Bay Ready

Contact Olympic Equipment with your vehicle types, ceiling height and available bay dimensions to confirm the right fit. Vehicle weight distribution, approved lifting points, arm reach and adapter engagement must all be considered. Confirm concrete specifications, electrical requirements and installation clearances against the current installation manual before purchase.

2PCFHD-18 Lift Questions

What are the overall height settings?

The 2PCFHD-18 has three overall height settings: 174, 186 and 198 inches. Overall width is 151 15/16 inches. Use the dimensions above when planning your service bay.

What does clear floor mean?

The overhead cross member connects the columns above the vehicle, leaving the floor between the posts clear for access and shop equipment.

What service work is this lift designed for?

It is designed for compatible truck, van and fleet maintenance applications, including underbody inspections and brake, tire and suspension service at the vehicle's approved lifting points.

Is this model available for immediate delivery?

The 2PCFHD-18 is offered for pre-order. Contact Olympic Equipment for current availability and arrival information.

Compare Olympic 2-post lifts · Explore professional lift installation · View equipment financing options

2-post lift accessories

Equip your service bay

Transmission jacks, oil drains and support stands for your shop. Choose the capacity and working height for your job.